Posts by Merrill

Monster Cleansing Solvent product evaluation

In the event you’re like most house theatre fans and multimedia users, you want the very best efficiency from your equipment. But in relation to cleaning your TVs, camcorders, digital camera lenses, high definition screens, and other video shows, you may actually be damaging your gear and harming performance - particularly for those who use an ordinary window cleaner.

Whereas these cleaners can remove most grime and fingerprints, they normally leave distracting streaks - and even everlasting scratches. Window cleaners also can drip all the way in which down a screen and into your internal parts’s moisture-sensitive electronics before you may wipe it off. This will trigger expensive harm, and even total equipment failure.

I tried Monster Cleaning Solvent on my 50" plasma and initially it appeared to work pretty properly, but as I appeared carefully at a mirrored image in the plasma glass I saw streaks! So, I acquired a flashlight and seemed over the whole surface and certain enough, there have been streaks all over. Now I'm not one to only slap some cleaner on and a few swipes and I am done. I meticulously polish the screen.

I began over doing a really small section, making use of cleaner to cloth, spreading on display, turning cloth to dry space, polish, polish polish - still streaks. Mind you I'm doing this with a flashlight in hand, so each little flaw is visible. I found that the one approach to forestall streaks is to continue working the damp cloth on the display till it much less damp, then flip to the dry space for polishing. Which brings me to another downside . After doing the above, I observed literally hundreds of little fibers on the display, with some seemingly adhering to the screen to the place I had to rub harder than I want to get them off. Even nonetheless after I did that there were more fibers. Once more, did this with a flashlight.

Lastly, After getting the whole lot seemingly good to go, I did a follow up inspection the day after I cleaned the screen with this Monster Cleaning product and observed what gave the impression to be a subtle film on the glass. I took a material and wiped it off simply, but darn if it didn't come back in a brief while. It looked like some sort of mild condensation. Again this was with a flashlight in hand. After all of this, I went again to my old Mirachem Optix cleaner and a real microfiber material (the tighter weave sort that is used for lens cleansing). I did one half of the display solely and left the opposite aspect because it was from the Monster cleaner. After a number of hours I went to inspect it once once more and there was the haze on the Monster facet, however the side I sued my old cleaner on was clear. Once I say haze, it isn't noticeable without the flashlight, so most folk would not see it, however with a flashlight it's obvious, significantly on the black band around the actual viewing area.

I have never tried this Monster Clean product on my LCDs and it might work great on the plastic floor, as opposed to the glass of the plasma. For me, it is just not price it. Get a good flashlight and test for your self ...or do not and you may never know that it is not perfect. This article is sponsored by Peachtree Ink, suppliers of excellent quality printer cartridge ink. If you're on the lookout for printer cartridge ink for your printer you will have found a wonderful website to match your present cost.